İletişim Bilgileri

ParsRos Malzeme Test Cihazları

  • Yetkili Kişi: Muhammed KURT
  • Telefon numarası: +90 (312) 394-28-68
  • +90 (546) 437-05-06
  • Skype: exanszte
  • Adres: Serhat Mahallesi 1364. Cadde No : 39 İvedik OSB / Ostim / Yenimahalle / ANKARA, Yenimahalle, Ankara, 06374, Türkiye

Çalışma Saatleri

Sitedeki güncellemeler
Automatic Cement Compression & Flexure Testing Machines, resim 1
  • Automatic Cement Compression & Flexure Testing Machines, resim 2
  • Automatic Cement Compression & Flexure Testing Machines, resim 3

Automatic Cement Compression & Flexure Testing Machines

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 Automatic Cement Compression and Flexural Test Machines
sipariş alınır, 10 gün
1 $
Satıcıya Ulaş
Ödeme ve Teslimat Şartları Çalışma Saatleri
İletişim Bilgileri
  • Yetkili Kişi: Muhammed KURT
  • Telefon numarası: +90 (312) 394-28-68
  • +90 (546) 437-05-06
  • Skype: exanszte
  • Adres: Serhat Mahallesi 1364. Cadde No : 39 İvedik OSB / Ostim / Yenimahalle / ANKARA, Yenimahalle, Ankara, 06374, Türkiye
Ürün ile ilgili detaylı bilgi

Product Code Product Description

PRS-CEMACCTM 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz

PRS-CEMACCTM /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz

PRS-CEMACFCTM 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz

PRS-CEMACFCTM /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz

PRS-CEMULP Upper Loading Platen with Ball Seating Assembly Ø:165 mm and Lower Loading Platen,

Ø:165 mm

PRS-CEMFLEXJ/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM

PRS-CEMFLEXJ /E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CEMCOMJ/A Compression Jig Assembly to test 50 mm (2”) mortar cubes, ASTM

PRS-CEMCOMJ /E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

PRS-CEMCOMJ/BS Compression Jig Assembly BS, to test 70,7 mm mortar cubes

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1

Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have

been designed for reliable and consistent testing of mortar samples.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be
factory installed) should be ordered separately.

The Automatic cement compression and flexure testing machines allow less experienced operators to perform the tests.

Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;

Setting test parameters, including pace rate (only required when the specimen type is changed.)

Choosing the compression or flexure frame by using the changeover valve.

Pressing the START button on the control unit.

The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the

machine and stops once the specimen failure.

Automatically saves the test parameters and test results.

The automatic cement compression and flexure testing machines consist of very rigid two column single or double

chamber frames, automatic hydraulic power pack with data acquisition and control system

Power Pack

Automatic Hydraulic Power Pack, dual stage, controlled by is designed to supply the required oil to the load frames for

loading. Very silent power pack can load the specimen between 50 N/sec to 2.4 kN/sec with an accuracy of ±5%. A

Rapid approach pump is supplied as standard. Safety valve (maximum pressure valve) is used to avoid machine

overloading.

Motor

The motor which drives the dual pump is an AC motor, 380 V, 50-60 Hz, 3 phase, 1 hp and 0.75 kW and it is controlled

by Omron J7 motor inverter. The variation in the oil flow is executed with the variation of the rotation speed of the motor.

Distribution Block

A distribution block is used to control the oil flow direction supplied by the dual stage pump, the following parts are fitted

to the distribution block;

a – Solenoid valve

b – Safety valve (maximum pressure valve)

c – Transducer

d – Low pressure gear pump

e – High pressure radial piston pump

Sipariş bilgileri
  • Fiyat: 1 $
  • Minimum Sipariş: 1 ad.
Ticiz.com'un rehber kategorisi: Ankara'daki Diğer inşaat ekipmanları
Oluşturma tarihi: 09.10.2018 10:18
Düzenleme tarihi: 08.11.2018 14:15